Z-600 is the most market plane line array system. With variable directivity, the height of each unit is 20 inch. The 2-way speaker cabinet is powered by one single amplifier channel (HF crossover network) and mounts two 10-inch low-mid frequency for a deep response and 6×1-inch high frequency piezoelectric horns that offers a brilliant and crispy high frequencies.
This cabinet offers a wide range of possibilities for permanent and mobile installations and is an excellent choice for medium and small sound reinforcement applications. Low frequencies can be reinforced with the SB-15 or SB-18LX subwoofer.
The mechanical design (HZ-600) of the Z-600 enables vertical angles between units of 0 to 10 degrees without use of flying pins allowing easy and quickly deployment for just one operator. The rigging frame (CHSEZ600) uses the same rigging system as the cabinets.
Technical data Z-600 Usable bandwidth (-10dB) 76 – 20.000Hz Maximum SPL (*) 136 dB (preset) Horizontal coverage angle: 90° Vertical coverage angle: Depends of the array elements and curvature Transducers LF: 2 x 10-inch LF woofer Transducers HF: 6 x 1-inch HF unit Nominal impedance: 4/16 Ω AES power handling: 600 W Connectors: 2 x NL4 Rigging components: 4-point rigging system Permissible flight load: 12 units Inter-enclosure angles (degrees): 0 / 0.25 / 2.5 / 5 / 10 Physical data W x H x D: 560 x 540 x 150 mm. Weight (net): 19 kg. Cabinet: First grade Baltic birch plywood Side panels: Steel rigging hardware Finish: High resistance rough black paint Front Steel grill: Steel grid with anti-corrosion coating and foam Rigging components: High grade steel with anti-corrosion coating (*) Peak level at 1 m under free field conditions using 10 dB crest factor pink noise with specified preset.