ST-10CX is a reinforcement unit for multiple applications, clubs, theaters, schools, etc. It can work as a module of array system, as a floor monitor or mounted above a subwoofer unit.
A very efficient coaxial unit are mounted with a 10-inch loudspeaker for the low-mid range and a 1.75-inch voice coil compression driver for high frequencies.
The simple angulations mechanism can be removed by removing the pins that hold it. It incorporates a handle for transport and a 35mm pole socket to attach a lifting support. The front of each cabinet is protected with a steel grid covered with a filter. Units are constructed with waterproof birch plywood with a black WARNEX coating.
Technical data ST-10CX Usable bandwidth (-10dB) 76 – 20.000Hz Maximum SPL (*) 128 dB (preset) Coaxial coverage angle (-6 dB) 90° Transducers LF/HF 10’’ LF woofer + 1,75 voice coil compression driver Nominal impedance: 8 Ω AES power handling: 300 W Connectors: 2 x NL4 Rigging components: 4-point rigging system Permissible flight load: 12 units Inter-enclosure angles (degrees): 0 / 2.5 / 5 / 7.5 / 10 / 12.5 / 15 Physical data W x H x D: 290 x 310 x 340 mm. Weight (net): 11 kg. Cabinet: First grade Baltic birch plywood Side panels: Steel rigging hardware Finish: High resistance rough black paint Front Steel grill: Steel grid with anti-corrosion coating and foam Rigging components: High grade steel with anti-corrosion coating (*) Peak level at 1 m under free field conditions using 10 dB crest factor pink noise with specified preset.