ST-10 is a reinforcement unit for multiple applications, clubs, theaters, schools, etc. It can work as a module of array system, as a floor monitor and mounted above a subwoofer unit.
The system incorporates a 10-inch cooling technology transducer and 1-inch exit compression driver with 1.75- inch voice coil coupled to 90ºx40º rotable horn.
The simple angulations mechanism can be removed by removing the pins that hold it. It incorporates a handle for transport and 35 mm socket pole to attach a lifting support. The front of each cabinet is protected with a steel grid covered with a filter. Units are constructed with waterproof birch plywood with a black WARNEX coating.
Technical data ST-10 Usable bandwidth (-10dB) 60 – 18.000Hz Maximum SPL (*) 134 dB (preset) Coverage angle (-6 dB). Horizontal: 90° Vertical Coverage: 40° Transducers LF: 10’’ LF woofer Transducers HF: 1″ compression driver with 1.75″ coice coil Nominal impedance: 8 Ω AES power handling: 600 W Connectors: 2 x NL4 Rigging components: 4-point rigging system Permissible flight load: 16 units Inter-enclosure angles (degrees): 0 / 2.5 / 5 / 7.5 / 10 / 12.5 / 15 Physical data W x H x D: 570 x 305 x 290 mm. Weight (net): 16 kg. Cabinet: First grade Baltic birch plywood Side panels: Steel rigging hardware Finish: High resistance rough black paint Front Steel grill: Steel grid with anti-corrosion coating and foam Rigging components: High grade steel with anti-corrosion coating (*) Peak level at 1 m under free field conditions using 10 dB crest factor pink noise with specified preset.