SB-18 is our compact subwoofer system which mounts an 18-inch transducer with cooling technology in an extraordinary and efficient horn-loaded enclosure.
The system is constructed with nordic phenolic birch plywood and all necessary reinforcements, resulting in a surprisingly clean response and mechanical noise free. Each unit incorporates slots that allow stacking units easely. In addition, it is possible to incorporate on demand NL4 connectors on the front to facilitate cardioid configurations.
SB-18H are the same product but incorporating the flying hardware manufactured with the highest quality and maximum strength steel.
|Usable bandwidth (-10dB)||35 Hz – 170Hz|
|Maximum SPL (*)||138 dB (preset)|
|Transducers LF:||1 x 18’’ LF woofer|
|AES power handling:||1400 W|
|Nominal impedance:||8 Ω|
|Connectors:||2 x NL4 (Cardioid front connector on demand)|
|W x H x D||546 x 680 x 719 mm.||546 x 744 x 719 mm.|
|Weight (net)||51 kg||70 kg|
|Cabinet||First grade Baltic birch plywood|
|Side panels:||–||Steel rigging panels|
|Finish:||High resistance rough black paint|
|Front Steel grill:||Steel grid with anti-corrosion coating and foam|
|Rigging components||–||High grade steel|
|(*) Peak level at 1 m under free field conditions using 10 dB crest factor pink noise with specified preset.|
|Datasheet a>||User’s Manual|