HL-1261
New HL-1261 is a 3-way system specially designed for clubbing applications. It is composed by horn-loaded 12-inch transducer with cooling technology for low frequencies, 6.5-inch neodymium transducer loaded on an efficient exponential horn with corrector, and one-inch compression driver for higher frequencies.
Its bi-amplified design allows high performance in whole bandwidth without generating high frequency disturbances at near field. System is built with Nordic phenolic birch plywood and it can be served finished on different color paint on demand.
Incorporates standar hardware to orientate the enclosure at different angles in stack configurations, thus being able to adjust coverage at field.
In addition, parts HPVHL1261 and HPCHL1261 are offered for flying and connection with another unit.
Combined with HL-118S subwoofer, obtains a sound system specially designed to meet the needs of the most demanding installations. For system stack, platforms AD3HL1261 and AD4HL1261 are offered for 3 and 4 HL-1261 enclosures respectively, becomes a complete system that fully meets all the pressure and coverage needs.
-
Technical data HL-1261 Usable bandwidth (-10dB) 85 – 20000 Hz Maximum SPL (dB-peak*) 140 Horizontal coverage angle: 70º Vertical coverage angle: 40º Transducers LF: 12″ LF woofer Transducers MF: 6,5″ Neodymium woofer Transducers HF: 1″ compression driver Nominal impedance: LF: 8 Ω / MHF: 8 Ω AES power handling: LF: 500 W / MHF: 200 W Connectors: 2 x NL4 Rigging components: Optional 4-point rigging system Permissible flight load: 2 units Inter-enclosure angles (degrees): 0º / 5º Physical data W x H x D: 363 x 656 x 550 mm Weight (net): 32,5 kg Cabinet: First grade Baltic birch plywood Side panels: Optional high-grade steel rigging hardware Finish: High resistance rough paint (*) Peak level at 1 m under free field conditions using 10 dB crest factor pink noise with specified preset. -
Downloads
Datasheet User’s Manual
HL-1261