TSA® introduces new constant curvature line source specially designed for fixed install and touring applications where high-level pressure and controlled dispersion is required. AX-408C incorporates 4x 8-inch low frequency transducers and 4x 1.75-inch voice coil compression drivers each coupled to an improved waveguide design.
Elements arrangement ensures high SPL with a perfect coverage. Its lightweight design enables small structures to be used for flight system. It allows to realize clusters with two cabinets for vertical dispersion up to 100º (-6 dB points). Thanks to its careful design, the flying hardware is simple and intuitive and let easy installation, even in touring situations.
CHSTAX408C transport case is also offered for 2 enclosures easy handling. AX408CP version is the same system offered as a solution for small range applications one-way configuration.
Technical data AX-408C AX-408CP Frequency response (±3 dB) 63 – 20000 Hz Usable bandwidth (-10dB) 55 – 20.000 Hz Maximum SPL (*) 142 dB (preset) Horizontal Coverage: 90° (-6 dB points) Vertical Coverage: 55° (-6 dB points) / 100° for 2 cabinets Transducers LF: 4 x 8-inch LF woofer Transducers HF: 4 x 1-inch Compression driver. 1,75-inch voice coil. 4 x 1-inch Compression driver. Nominal impedance: LF: 8 Ω / HF:8 Ω 8 Ω AES power handling: LF: 1000 W / HF:280 W 1000 W Connectors: 2 x NL4 Rigging components: 4-point rigging system Permissible flight load: 2 units Stack angles (degrees): -5 / 0 / 5 / 10 / 15 / 20 Physical data W x H x D: 458 x 844 x 320 mm. Weight (net): 39 kg. 35 kg. Cabinet: First grade Baltic birch plywood Side panels: Steel rigging hardware Finish: High resistance rough black paint Front Steel grill: Steel grid with anti-corrosion coating and foam Rigging components: High grade steel with anti-corrosion coating (*) Peak level at 1 m under free field conditions using 12 dB crest factor pink noise with specified preset.